а√天堂中文在线资源bt在线,日本道综合影音,男人的天堂在线播放,国产高潮流白浆免费观看

     
  中文版 English
 
Hot news:
  News
  Company news
  Industry News
  Current news
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Industry News
Home  -  News  -  Industry News
what are AS/NZS 3112 Plugs and socket-outlets test gauges?
From: BONAD  Date: 2024-03-27 16:43:55


what are AS/NZS 3112 Plugs and socket-outlets test gauges?

AS/NZS 3112 Plugs and socket-outlets test gauges
Australian and New Zealand standard

Standard: AS/NZS 3112:2011


This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EL-004, Electrical Accessories to supersede AS/NZS 3112:2011.Regulatory Authorities have accepted a transition period of 18 months for the requirements of particular clauses.InClause3.1.2,new requirements have been added. In Paragraphs J2.3, J4.3.1 and J4.8.2 through to J4.8.4.1 of Appendix J, new and pre-existing requirements are included, During the transition period the new requirements as detailed above may be applied in lieu of the pre-existing requirements. All other parts of this Standard take effect from the date of publication, The 'new requirementdate of application(DOA) and the 'pre-existing’ date of withdrawal (DOW), where relevant, are indicated by the marginal bar against the part affected.

The objective of this Standard is to provide the Australian and New Zealand electrical industry, including manufacturers, test laboratories and regulators, with requirements and test methods for plugs and socket-outlets. This Standard is one of a series of approval and test specifications to be read in conjunction with AS/NZS 3100, Approval and test specification-General requirements for electrical equipment, The purpose of this series is to outline conditions which need to be met to secure approval for the sale and use of electrical equipment, Only safety matters and related conditions are covered.

The essential safety requirements in AS/NZS 3820,Essential safety requirements for electrical equipment, which could be applicable to plugs and socket-outlets, are covered by this Standard, taken in conjunction with any other relevant requirements affecting safety.


the below table is the product list of AS/NZS 3112 Plugs and socket-outlets test gauges:



Name

Description

AS/NZS3112 Fig.3.1/10A/15A

Depth of No-contact test gauge

AS/NZS3112 Fig.3.6 Max 10A

Three-pin gauge

AS/NZS3112 Fig.3.7 Max 10A

Two-pin gauge

AS/NZS3112 Fig. A

Gauge for three-pin flat-pin plugs

AS/NZS3112 Fig. B

Gauge for two-pin flat-pin plugs with parallel pins

AS/NZS3112 Fig. C

Three-pin test plug with flat pins

AS/NZS3112 Fig. D

Three-pin test plug with flat pins for abnormal insertion test

AS/NZS3112 Fig. E

Plugs and socket-outlets for use in extra-low voltage circuits

AS/NZS3112 Fig. F

Three-pin test plug with flat and round pins


 
 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com